Roof Cleaning Cost (2026): Prices by Size and Roof Type

Professional roof cleaning cost typically falls around $296 to $626 for many homes, although projects can fall outside that range depending on roof size, material, pitch, cleaning method, biological growth, and accessibility. Current published per-square-foot references also vary significantly depending on what type of roof and cleaning service is being described.

That distinction matters because roof cleaning is not automatically the same thing as pressure washing a roof.

For example, major asphalt-shingle manufacturers warn against high-pressure washing because it can loosen or remove protective granules. Concrete tile may allow professional low-intensity pressure washing in appropriate circumstances, while other roofing systems may have their own manufacturer-specific requirements.

For that reason, estimating roof cleaning requires more than multiplying house square footage by one universal rate.

This guide compares current U.S. pricing references, explains roof cleaning costs by size and roof type, and shows how pitch, material, moss, algae, and cleaning method can change the scope of work.

---

2026 Roof Cleaning Cost at a Glance

Current pricing sources describe several different types of roof-cleaning work.

Angi reports approximately $296–$626 for professional roof cleaning depending on roof size and cleaning method. Its separate pressure-cleaning guide reports approximately $200–$1,200, or around $0.20–$0.60 per square foot, for pressure-cleaning projects where that approach is suitable.

Homewyse currently estimates basic general roof cleaning at $0.24–$0.45 per square foot, shingle cleaning at $0.37–$0.47, and tile-roof pressure washing at approximately $0.51–$0.63.

These numbers should not be averaged blindly because they do not necessarily describe identical roofs or cleaning methods.

These published ranges describe different cleaning methods and roof types. They are comparison benchmarks, not interchangeable prices for the same project.

The differences between those rates are useful rather than inconvenient.

They demonstrate why a homeowner should ask what cleaning method, roof material, and scope are actually included in an estimate instead of treating every roof-cleaning price as the same service.

---

Roof Cleaning Cost by Size

Square footage remains useful for planning, but WashNumbers does not use one universal roof rate for every material.

Instead, the table below applies Homewyse’s current $0.24–$0.45/sq. ft. general roof-cleaning reference to several roof sizes. This is a mathematical comparison of a published range, not a claim that every roof of that size should cost exactly this amount.

Calculated from Homewyse’s January 2026 general roof-cleaning reference of $0.24–$0.45 per square foot. Actual projects may differ because of minimum charges, roof type, pitch, method, condition, and access.

This also explains why broad project averages and per-square-foot calculations do not always line up perfectly.

A small easy-access roof may encounter minimum labor and travel charges, while a large or difficult roof may be influenced more strongly by actual cleaning area and access conditions.

For broader surface comparisons, see our pressure washing cost per square foot guide.

---

Roof Cleaning Cost per Square Foot

A reasonable published reference for general roof cleaning is currently around $0.24–$0.45 per square foot, according to Homewyse. But more specific services produce different figures.

For example:

• General roof cleaning: $0.24–$0.45/sq. ft.
• Roof-shingle cleaning: $0.37–$0.47/sq. ft.
• Angi pressure cleaning: $0.20–$0.60/sq. ft.
• Tile-roof pressure washing: $0.51–$0.63/sq. ft.

That does not mean tile should always cost more, nor does it mean pressure washing is appropriate for every roof.

The correct interpretation is that method and material matter enough that one universal roof-cleaning rate is misleading.

---

Roof Cleaning vs. Roof Pressure Washing

This distinction is crucial.

“Roof cleaning” describes the desired outcome.

“Pressure washing” describes one possible cleaning method.

Those are not interchangeable terms.

A pressure washer that may be suitable for one roofing system can be inappropriate for another. For asphalt shingles in particular, major manufacturers specifically warn against high-pressure washing. GAF says pressure washers can cause shingles to lose protective granules and lift, and its technical guidance says not to power wash shingles for algae cleaning.

Asphalt Shingles

Asphalt shingles should not be treated like concrete.

GAF advises against pressure washing shingles because excessive pressure can remove granules and damage the roofing system. Owens Corning similarly provides roof-maintenance guidance centered around appropriate cleaning and maintenance rather than treating the roof as a hard pressure-washing surface.

For algae or moss problems, a low-pressure treatment or manufacturer-approved process is generally more appropriate than blasting the roof with high pressure.

Concrete Tile

Concrete tile is different.

The Tile Roofing Industry Alliance states that concrete tile is very low maintenance and that professional low-intensity pressure washing can be performed if desired.

That does not mean maximum pressure should be used or that every tile roof should automatically be pressure washed.

Tile condition, installation, accessibility, and manufacturer guidance still matter.

Clay Tile

TRI describes clay tile with matte or glazed ceramic finishes as essentially maintenance-free.

That is another reason WashNumbers does not recommend one generic cleaning procedure for every “tile roof.” Concrete and clay should not automatically be treated as identical materials.

Metal Roofing

Metal roofs can also vary by coating and manufacturer.

Cleaning products, tools, and allowable methods may differ between systems, so manufacturer-specific maintenance instructions should take priority over generic internet advice.

A shingle roof is normally treated at two to three percent sodium hypochlorite, and you can work out that mix here if you want to know what a contractor is putting on your roof.

Roof Cleaning Method by Material

This table is intentionally conservative.

WashNumbers does not assign a universal PSI number or cleaning method to every roof material because manufacturer requirements and actual roof condition should take priority.

---

Roof Cleaning Cost by Roof Type

Roof type can affect both the cleaning method and the amount of labor involved.

Asphalt Shingle Roof Cleaning Cost

Homewyse currently lists basic roof-shingle cleaning at approximately $0.37–$0.47 per square foot.

For a 2,000-square-foot shingle roof, applying that published reference mathematically gives approximately:

2,000 × $0.37 = $740

to

2,000 × $0.47 = $940

This is a comparison based on Homewyse’s published rate, not a guaranteed quote.

Because high-pressure washing can damage asphalt shingles, homeowners should also confirm which cleaning method is included, not only the price.

Concrete Tile Roof Cleaning Cost

Homewyse currently lists basic tile-roof pressure washing at approximately $0.51–$0.63 per square foot.

For a 2,000-square-foot tile roof, that mathematically corresponds to approximately:

$1,020–$1,260

under those published assumptions.

TRI confirms that professional low-intensity pressure washing can be appropriate for concrete tile, but that should not be interpreted as permission for indiscriminate high-pressure cleaning.

Clay Tile Roof Cleaning Cost

Clay tile requires a material-specific approach.

Because clay tile can differ significantly in finish, age, installation, and fragility, WashNumbers does not assign an unsupported universal cost multiplier.

A contractor may need to account for safe access and tile protection in addition to the cleaning itself.

Metal Roof Cleaning Cost

Metal roof cleaning cost depends on roof size, coating, slope, access, staining, and the manufacturer’s approved maintenance process.

Rather than assuming metal is always cheaper or more expensive, homeowners should compare quotes based on the actual scope and approved cleaning method.

---

Roof Size Is Not the Same as Home Square Footage

This is one of the easiest mistakes to make when estimating roof cleaning.

A 2,000-square-foot home does not automatically have a 2,000-square-foot roof.

Home floor area measures interior living space.

Roof area depends on factors such as:

• building footprint,
• number of stories,
• roof pitch,
• garage coverage,
• porches,
• overhangs,
• dormers,
• valleys,
• and roof geometry.

For example, two 2,000-square-foot homes could have very different roof areas if one is a two-story compact house and the other is a wide single-story home.

When possible, obtain the actual roof area rather than substituting interior floor area.

---

How Roof Pitch Changes Cleaning Cost

Pitch affects more than roof area.

A steep roof can also change how safely and efficiently the contractor can work.

Imagine two roofs with the same measured surface area:

Roof A

• 2,000 sq. ft.
• low pitch
• simple two-plane design
• easy ladder positioning
• light algae

Roof B

• 2,000 sq. ft.
• steep pitch
• multiple valleys
• dormers
• limited ladder positioning
• heavier moss growth

The square footage is identical.

The cleaning scope is not.

That is why WashNumbers treats roof size as one variable rather than the complete estimate.

---

How Moss, Algae, and Staining Affect Roof Cleaning Scope

Not all roof discoloration is the same.

Owens Corning notes that algae can cause characteristic dark or brown streaks on asphalt shingles.

Moss is different because it can form thicker biological growth on and between roof materials.

GAF specifically warns homeowners not to remove moss from shingles using a pressure washer because the force can cause granule loss and lift shingles.

The amount and type of biological growth can affect:

• treatment selection,
• dwell time,
• number of applications,
• rinsing method,
• cleanup,
• and whether immediate visual removal is appropriate.

A roof with faint algae staining should therefore not automatically be priced or treated the same as a roof with substantial moss growth.

---

How Roof Accessibility Changes Cost

Access is especially important for roof work because it can directly affect both labor and safety.

Potential complications include:

• two- or three-story rooflines,
• steep slopes,
• limited ladder locations,
• pools or landscaping around the house,
• narrow side yards,
• roof valleys,
• dormers,
• fragile tile,
• solar panels,
• and sections that are difficult to reach from the ground.

A simple one-story roof with open perimeter access is a different project from a steep roof surrounded by obstacles.

---

Other Factors That Affect Roof Cleaning Prices

Roof Complexity

Valleys, hips, dormers, chimneys, skylights, and multiple roof levels can create more detailed work than a simple two-plane roof.

Gutters

Roof cleaning and gutter cleaning are separate services unless the quote specifically includes both.

However, homeowners may choose to schedule them together.

Solar Panels

Solar panels can restrict access to parts of the roof and create areas where debris accumulates.

They should not simply be treated as ordinary roof surface.

Nearby Landscaping

Cleaning solutions and runoff may require protection of plants, furniture, siding, pools, or other surrounding surfaces.

Repairs

Loose shingles, broken tiles, leaks, damaged flashing, or other roof defects may need attention before or separately from cleaning.

Cleaning does not replace roof repair.

---

Same Roof Size, Different Cleaning Scope

This is the central idea behind this page.

Consider two hypothetical 2,000-square-foot roofs.

Roof A — Simpler Cleaning Scope

• asphalt shingles,
• low pitch,
• light algae,
• simple roof shape,
• open perimeter access,
• no solar panels.

Roof B — More Complex Cleaning Scope

• tile,
• steep pitch,
• heavier biological growth,
• multiple valleys,
• solar panels,
• restricted ladder access.

Both contain the same nominal roof area.

But material, approved cleaning method, access, roof geometry, and surface condition all differ.

2,000 sq. ft. does not automatically mean the same cleaning job.

---

DIY vs. Professional Roof Cleaning

Roof cleaning is different from DIY cleaning at ground level.

There are two separate risks:

surface damage and working at height.

High-pressure cleaning can damage certain roofing materials, particularly asphalt shingles. GAF specifically warns against using pressure washers on shingles for moss and algae treatment.

There is also the obvious risk associated with ladders, wet roofing surfaces, steep slopes, and fragile materials.

For that reason, WashNumbers does not recommend treating roof cleaning as a straightforward DIY pressure-washing project.

Homeowners who do perform roof maintenance should follow the specific roofing manufacturer’s instructions and avoid procedures that could damage the roof or create unsafe working conditions.

---

Roof Cleaning Cost Examples

The following examples are planning comparisons, not contractor quotes.

Example 1 — 1,500 Sq. Ft. General Roof Cleaning

Using Homewyse’s published general cleaning range:

1,500 × $0.24 = $360

1,500 × $0.45 = $675

Published-range comparison:

$360–$675

Actual pricing may differ depending on material and scope.

Example 2 — 2,000 Sq. Ft. Shingle Roof

Using Homewyse’s shingle-cleaning reference:

2,000 × $0.37 = $740

2,000 × $0.47 = $940

Published-range comparison:

$740–$940

This does not imply pressure washing should be used on the shingles.

Example 3 — 2,000 Sq. Ft. Tile Roof

Using Homewyse’s tile-roof pressure-washing reference:

2,000 × $0.51 = $1,020

2,000 × $0.63 = $1,260

Published-range comparison:

$1,020–$1,260

The appropriate cleaning method still depends on the actual tile roof.

Example 4 — Why Size Alone Is Incomplete

Suppose two roofs are both 2,000 sq. ft.

One is low-pitch, easily accessible, and lightly stained.

The other has steep sections, multiple valleys, moss, and limited access.

Using identical square footage does not capture those differences.

The contractor quote may therefore differ even before the roofing material itself is considered.

---

Estimate Your Exterior Cleaning Cost

For other exterior surfaces around the property, use the WashNumbers Pressure Washing Cost Calculator.

You can also compare:

• House Pressure Washing Cost
• Driveway Pressure Washing Cost
• Deck Pressure Washing Cost
• Patio Pressure Washing Cost
• Fence Pressure Washing Cost

For details on how WashNumbers uses published pricing information and modeling assumptions, see our methodology.

---

Frequently Asked Questions

---

Sources

• Angi — How Much Does Roof Cleaning Cost?
• Angi — How Much Does Pressure Cleaning a Roof Cost?
• Homewyse — Cost to Clean Roof
• Homewyse — Cost to Clean Roof Shingles
• Homewyse — Cost to Pressure Wash Tile Roof
• GAF — Roof Moss Removal: How to Remove Moss on Roof Shingles
• GAF — Blue-Green Algae Staining on Shingled Roof Surfaces
• Owens Corning — Cleaning Roof Shingles & Maintenance Tips
• Tile Roofing Industry Alliance — Tile Roof FAQs

Written by Diego Hernández, founder of WashNumbers. Cost models are built from published contractor rates and public price observations. See how we build these numbers.

Last reviewed: August 2026